Gigabyte released its newest premium HTPC motherboard in the mini-ITX form-factor, the A75N-USB3. As the name might suggest, this is a socket FM1 motherboard based on the AMD A75 chipset, and features USB 3.0 connectivity as TPU reports today:

This board crams in everything a HTPC can benefit from. First, the FM1 socket seats AMD A-Series accelerated processing units (APUs), which pack up to four x86-64 cores with up to 4 MB cache, dual-channel DDR3-1866 integrated memory controller, and more importantly, a very powerful integrated graphics processor in the Radeon HD 6500 class. The FM1 socket on this board is powered by a 3+1 phase VRM that makes use of driver-MOSFETs. Power is drawn by a 24-pin ATX and a 4-pin CPU power connector.

The lone expansion slot is a PCI-Express 2.0 x16. The CPU is wired to two full-length DDR3 DIMM slots, which can take in up to 32 GB (that's right, future 16 GB DIMMs are supported) of dual-channel DDR3-1866 MHz memory. The AMD A75 chipset gives out four internal SATA 6 Gb/s ports, and one eSATA 6 Gb/s port on the rear panel. Display outputs include HDMI 1.4a and DVI. Analog outputs are done away with. Audio is handled by a high-quality Realtek ALC889 HD audio codec. Although this codec supports 8+2 output channels, it is wired to a 5.1 channel shared audio jack cluster, apart from the internal HDA_FP header. Those needing 7.1 channel output can still use the TOSLINK connector, that supports 7.1 channel output with 24-bit, 192 kHz resolution and Dolby Home Theater support. If even that's not enough, the HDMI connector gives you 7.1 channel HDMI audio with Dolby Prologic support.