TeamGroup MP32 M2 NVMe 480GB SSD Review

Memory (DDR4/DDR5) and Storage (SSD/NVMe) 378 Page 4 of 22 Published by

teaser

Product Showcase

Product Showcase

The following images were taken at high-resolution and then cropped and scaled down. The camera used was a Canon DSLR shooting 24 MegaPixel photos. Right then, off we go.
 

Img_6090


The sample we have at hand is the 256 GB M.2 model. Performance is listed as 1,500 MB/s for reads and 800 MB/sec for writes with roughly 200 IOPS at 4k random writes QD32 aligned disk access with our tested model (the numbers differ a bit per alternating volume size).
 


43566_img_6091

  
Above, the tested unit; you should easily be able to place the M.2 unit into a compatible motherboard. This stick needs PCIe 3.0 x2 / NVMe 1.3. You should, however, check out with the motherboard manufacturer if you have proper lane PCIe version with NVMe support.

 

 Img_6092

  

While we'll look at components on the next page, we can already reveal .. the backside does not show any SMT traces, only the front side is equipped with components and NAND chips. 

Share this content
Twitter Facebook Reddit WhatsApp Email Print