Product showcase

SilentiumPC Navis 240 RGB (continued)

The provided fans are the SilentiumPC Sigma HP RGB 120 mm. You’ll receive two of them. The fans have a black, plastic frame with 9 white/transparent blades. Anti-vibration pads are provided on the mounting corners, and that’s a nice bonus given the price.

The basic specifications are listed below:

• Fan Dimensions: 120 x 120 x 25 mm
• Fan Speed: 800 ~ 2300 RPM +/- 10 %
• Control Mode: PWM

That’s the theory, but in reality, the range of useful RPMs is wider (especially in the lower end):

 In Fan Xpert 4, it was possible to set the RPMs as low as about 620 (in Extreme Quiet mode). So, in fact it looks better than what SilentiumPC declares (minimum 800 rpm). You have to remember that results may vary depending on the fan sample and the motherboard too.

 As for the radiator - it’s a slim, aluminium one with many fins, so nothing that would surprise anyone.
275 x 120 x 28 mm, the last dimension is the thickness.  

 As for the pump, it has an RGB strip around the block and the SilentiumPC logo on top of it. Overall the look is simply good.

 Three flat cables come out from the side of the block:

• 1x SATA cable
• 1x RGB connector (plugged into the motherboard)
• 1x RGB pass-through connector (for linking to the fans etc)

 The Navis 240 uses 380 mm long, flexible rubber tubing. Unfortunately, it’s not sleeved (would bring better aesthetics). 

One last information for this part - you can easily refill the liquid via a port on the edge of the radiator.