Product Showcase - the finished build
Product Showcase - the finished build
On this page, you'll find a selection of photos of the finished build inside the Seasonic SYNCRO Q704. The GPU that we used here is an air-cooled RTX 2080 Ti, and the CPU is cooled (for measurements) either with air (from this review, it's Deepcool AS500, not Thermalright True Spirit 120 Direct) or with a liquid cooler, with the rad placed at the top of the case.
The NZXT Kraken X62 was used for this photo section. The motherboard is an ATX form factor one, based on the X470 with AMD Ryzen 7 3700X instead of the Z390 chipset, with an Intel i9 9900K used until now. The GPU comes from Gigabyte, and it's the Gaming OC version (GeForce RTX 2080 Ti). The final result looks nice. You can see that the GPU and the MB cables are coming out of the holes on the left side of the chassis from the place where the Connect module is installed (on the opposite side). That's a brilliant idea.
No issues were encountered during installing the components inside, but I recommend connecting the cables to the Connect module before screwing it into the chassis. Overall, fitting all the cables of the test setup in the case wasn't difficult (the amount of space for the wires at the back is sufficient), and the EPS power cable didn't need to be pre-routed before we attached the motherboard to the tray.
