Product showcase – Interior

Product Showcase - Interior

Typically (in older cases), you’d need to take out the motherboard to install a new cooler. The giant cut-out for your cooler’s backplate should make life easier. With the solution mentioned above, you can reach it from both sides without the unpleasant experience of removing your motherboard from the chassis.

Here, you can see three cable cut-outs to the left and top of the motherboard without the rubber grommets. You can fit relatively significant components inside. This case supports graphics cards up to 380 mm and CPU coolers up to 165 mm in height. Liquid cooling enthusiasts will be ok with this product, as it’s possible to mount a combo of up to 360 + 280 + 120 mm radiators.

The case has 7 PCI card slots, which are secured with screws, unfortunately not thumbscrews (in default state)

Seasonic Arch Q503 comes from the factory with three 120mm Seasonic ZFF1225L non-RGB fans (produced by Zeta), with 800rpm, 17.5 dBa, and 28 CFM.

A 120 mm fan is pre-installed at the back. You can easily mount a 120 mm AIO in there instead. 

At the front, you can see a place for three 120 mm fans (or two 140 mm ones), or you can install an LCS there, provided that it’s nothing more significant than a 360 mm rad.