Setup | Noise | Power consumption | Heat levels

Hardware installation

Product installation is really easy. Once the card is installed and seated into the PC we connect the two 6-pin a power connectors to the graphics card.

Pelase do make sure your power supply is compatible:

• GeForce GTX 465 needs two 6-pin PEG connectors
• GeForce GTX 470 needs two 6-pin PEG connectors
• GeForce GTX 480 needs one 6-pin PEG and one 8-pin PEG connector

Preferably the PEG headers come directly from the power supply and are not converted from the Molex peripheral PEG connectors. You can now turn on your PC, boot into Windows, install the latest NVIDIA Forceware driver and after a reboot, all should be working. No further configuration is required or needed.

Power consumption

Lets have a look at how much power draw we measure with this graphics card installed.

The methodology: We have a device constantly monitoring the power draw from the PC. We simply stress the GPU, not the processor. The before and after wattage will tell us roughly how much power a graphics card is consuming under load.

Our test system is based on a power hungry Core i7 965 / X58 based. This setup is overclocked to 3.75 GHz. Next to that we have energy saving functions disabled for this motherboard and processor (to ensure consistent benchmark results). On average we are using roughly 50 to 100 Watts more than a standard PC due to higher CPU clock settings, water-cooling, additional cold cathode lights etc.
Keep that in mind. Our normal system power consumption is higher than your average system.

Graphics card

1. Advertised GeForce GTX 465 TDP = 200W
2. System in IDLE = 178W
3. System Wattage with GPU in FULL Stress = 339W
4. Difference (GPU load) = 161 W
5. Add average IDLE wattage ~ 25W
6. Subjective obtained GPU power consumption = ~ 186 Watt

Mind you that the System Wattage is measured from the wall socket and is for the entire PC.

Recommended Power Supply

Here is Guru3D's power supply recommendation:

GeForce GTX 465

• On your average system the card requires you to have a 500 Watt power supply unit.

GeForce GTX 465 in SLI

• A second card requires you to add another ~200 Watts. You need a 700 Watt power supply unit.

For each other card (3-way SLI) that you add, just add another 200 Watts as a safety margin.

There are many good PSUs out there, please do have a look at our many PSU reviews as we have loads of recommended PSUs for you to check out in there. What would happen if your PSU can't cope with the load?:

• bad 3D performance
• crashing games
• spontaneous reset or imminent shutdown of the PC
• freezing during gameplay
• PSU overload can cause it to break down

The graphics card cooler performance examined

Let's have a look at the temperatures this custom cooler offers.

primary temperatures and clocks during heavy stress

We now fire off a hefty shader application at the GPU and start monitoring temperature behavior as it would be when you are gaming intensely and continuously, we literally stress the GPUs 100% here, as you can see in the graph.

We measured at a room temperature of 21 degrees Celsius. Now we report at two stages the GPU(s) in IDLE and under stress. Here's what we get returned:

The product now runs a little lower at 70 Degrees C maximum (roughly).

As you can see the MSI GTX 465 Twin Frozr II remains at very acceptable heat levels.

Noise Levels coming from the graphics card

When graphics cards produce a lot of heat, usually that heat needs to be transported away from the hot core as fast as possible. Often you'll see massive active fan solutions that can indeed get rid of the heat, yet all the fans these days make the PC a noisy son of a gun. I'm doing a little try out today with noise monitoring, so basically the test we do is extremely subjective. We bought a certified dBA meter and will start measuring how many dBA originate from the PC. Why is this subjective you ask? Well, there is always noise in the background, from the streets, from the HD, PSU fan etc etc, so this is by a mile or two an imprecise measurement. You could only achieve objective measurement in a sound test chamber.

The human hearing system has different sensitivities at different frequencies. This means that the perception of noise is not at all equal at every frequency. Noise with significant measured levels (in dB) at high or low frequencies will not be as annoying as it would be when its energy is concentrated in the middle frequencies. In other words, the measured noise levels in dB will not reflect the actual human perception of the loudness of the noise. That's why we measure the dBA level. A specific circuit is added to the sound level meter to correct its reading in regard to this concept. This reading is the noise level in dBA. The letter A is added to indicate the correction that was made in the measurement. Frequencies below 1kHz and above 6kHz are attenuated, whereas frequencies between 1kHz and 6kHz are amplified by the A weighting.

For each dBA test we close the PC/chassis and move the dBA gun 75 cm away from the PC. Roughly the same proximity you'll have a PC in a real-world situation.

dBA

The idle noise levels coming from the card are downright silent, in idle you will barely hear the card as we measured 37 dBA, which is right below the threshold of noise coming from that PC itself.

Once the GPU starts to heat up the fan RPM will remain fixed at 40% RPM, meaning the noise level did not change and remain at roughly 38 DBa. You can hear it in the background noise but will need to listen really carefully. So that definitely is great cooling versus a nearly inaudible noise level. We like that very much.