Product showcase – the build
Product showcase – the build
The side provides space for radiators up to 280 mm; the top is up to 360 mm (but only 28 mm wide). We installed our old/trustworthy NZXT Kraken X62 (280 mm LCS) at the side.
The PSU is also secured through the rear; its fan facing the side panel will draw fresh air. Routing the cables at the back of the motherboard tray wasn’t very difficult, as there’s about 80 mm of space for that. Theoretically, you can install the E-ATX motherboard here, but it would block the cable routes.
While HYTE does advertise E-ATX support, it would cover the cable-routing holes in the process.
The inside is very flexible in terms of the installation process. The GPU is installed vertically. Before installing the motherboard, you first detach the pre-installed PCIe riser cable from the expansion slot. These days, the ATX boards usually skip the top-most slot; you have to move it down one slot.
