Product showcase – Interior

Product Showcase - Interior

Typically (in older cases), you’d need to take out the motherboard to install a new cooler. The giant cutout for your cooler’s backplate should make life easier. With the solution mentioned above, you can reach it from both sides without the unpleasant experience of removing your motherboard from the chassis. At the side, you can see a place for two 120 mm fans (or two 140 mm ones), or you can install an LCS there, provided that it’s nothing more extensive than a 280 mm rad. 

There are two cutouts with rubber grommets on the right side of the motherboard.

The case has 3 PCI card slots secured with screws for vertical mounting of a GPU and six half-height horizontal mounts.

You can see the included PCIe 4.0 riser card preinstalled. It looks excellent, there's also the name of the company included.

There’s about 15 cm for the combination of the fan and the radiator at the side.

120 mm fans installed at the bottom of the chassis have a relatively low number of blades with fairly steep angles, indicating that they’re rather low-pressure products. The fans that are provided are 3pin, non-RGB ones. 

A 120 mm fan is pre-installed at the back.

It’s powered by a 3-pin cable (that’s fine). You can easily mount a 120 mm AIO in there instead.