Product Showcase - The finished build
Product Showcase - The finished build
On this page, you’ll find a selection of photos of the finished build inside the Deepcool Macube 310P. The GPU that we used here is an air-cooled RTX 2080 Ti, and the CPU is cooled (for measurements) either with air (Thermalright True Spirit 120 Direct), or with a liquid cooler placed at the front of the case.
The NZXT Kraken X62 was used for the purpose of this photo section (with the radiator placed at the front). The motherboard is an ATX form factor one based on the Z390 chipset, with an Intel i9 9900K. The GPU comes from Gigabyte, and it’s the Gaming OC version (GeForce RTX 2080 Ti). The final result looks nice. There were no major issues with installing the components inside. Only, the PSU space was tight for our Seasonic Prime Ultra Titanium 850W, which is 170 mm long. Overall, fitting all the cables of the test setup in the case wasn’t really difficult (the amount of space could have been a bit higher), and the EPS power cable didn’t need to be pre-routed before we attached the motherboard to the tray.
