Product Showcase
Product showcase
The radiator on the H100i is based on a 240 mm design that is 27 mm thick and has a fin density typically seen in other all-in-one liquid coolers. This should allow for better airflow through the radiator, and lower noise levels at similar RPM. Push/pull fan setups are possible with the Corsair H100i RGB PRO XT to further increase the performance.
The provided 120 mm fans run at a maximum of 2400 rpm, and feature a maximum airflow of 75 CFM.
That’s the theory, but in reality, the range of useful RPMs is when using the motherboard fan header (it's better to connect this cooler like recommended in the manual):
The radiator’s dimensions are 277 x 120 x 27 mm. To simplify the design, the pump, reservoir, and radiator are of course set up as one unit. The radiator is minimalistic, but they’ve still put the manufacturer’s shiny logo on the side. The tubing is approximately 350 mm long and has black braided sleeving.
The quality of the CPU block is great, and there’s the manufacturer’s logo here as well (RGB-enabled).
This time it’s all-black, which makes it sleeker and more universal than the H100i Pro version. The water block has a copper base.
The base of the block does not have a mirror finish, it does come with pre-applied thermal paste.
