Overclocking The Core i7 4770K
Overclocking The Core i7 4770K
If you are planning to do some overclocking with a Haswell based processor, you are so much better off with a K model processor. The downside, Intel charges you extra cash for it these days. Why K versions you ask? Well, the default non-K processors will be much harder to overclock. With Nehalem/Clarkdale (last generation Core i3/i5/i7) you pretty much take your base clock of 133 MHz and apply say a default multiplier of 25, that would be your 3.33 GHz processor. That base clock was capable of going so much higher, 150, 186 and when tweaked right, even over 200 MHz. So if you were able to apply a fictive 175 MHz on your base clock, you could multiply it with the limited 25 multiplier. That would get you 4375 MHz. The new technology however has an embedded GPU / video processor merged into the very same processor die running over the same bus sharing the same L3 cache memory, things get increasingly complicated in matters of tweaking. But please do get a 30 USD more expensive K version and in the BIOS you'll have much better tweaking options. With a proper motherboard you can now set a multiplier per core.
The (generic) procedure is as follows:
- Leave baseclock for what it is
- If present, increase the TDP limit of your processor to 200~250 Watts
- With a 4770K change Turbo multiplier to 44 initially and gradually work your way upwards.
- Increase CPU voltage, though setting AUTO might work fine, we think 1.2~1.250V on this motherboard is a sweet spot.
- Make sure your processor is properly cooled with enthusiast grade heatpipe cooling or liquid cooling
- Save and Exit BIOS / UEFI
Overclocking with the Z97 on an ASUS motherboard is easy. Basically in the BIOS we flick the multiplier towards 48, activated the XMP memory profile (2133 MHz) and we were up and running 100% stable. We did not need to tweak any voltages whatsoever !
Heat issues are a problem with Haswell, but with voltager default you can see that at 4800 MHz we have a golden sweetspot. Absolutely stable whilst the stress temperatrues remain acceptable. So we recommend 4800 MHz with default voltage as only then the temps remain okay.
Results Core i7 4770K / 4800 MHz / 2133 Mhz DDR3
Below you can find a handful of results we ran with the overclocked settings as explained.
