X7007:

Do you change anything in the Radeon Control panel in performance or anything else?

As usual. Manual all. 2400 or 2500 minimal GPU speed. 1125v. +15% power limit. 2108mhz memory, fast timing. And full manual fan settings, no zerorpm, 80degree at 33% fan speed. Rest default although antilag set on, and sharpness 30%.

Anyone has AMD Ryzen Master installed also? I don't have it installed, but I remember it didn't make a difference when I had it. This is when I play some old game, there is no issue. bladestorm Nightmare and also Devil May Cry 5. It seems something in VR cause it to go to save mode or some games/engines This is also when I use MorePower! to limit the power to 330 instead 255, but usually this game had weird stuttering happening. it happened when the GPU reached 100% so it lowered a lot more than 5 Fps. now the GPU doesn't reach 100% only when I push it a lot when using 3D Shader (SuperDepth3D) with reshade, but it doesn't bother much with the 6900xt with the fast big memory compared to 1080GTX. For example Heroes of the Storm doesn't have issues, WoW DX12 with raytracing didn't have issues. So I can't understand why the hell VR would have this issue, same as Nvidia!!! You do remember right???? what did Nvidia do to fix this??? how it got fixed?? what was the problem? I also remember when I didn't had stuttering in some games, it was when using Discord Shared screen for example, then I used my VR using the Superdepth3D shader with that, not even a real VR game, it didn't have stuttering. I started playing with a friend co-op in VR and it pisses me off, it should be fixed already, I waited and waited https://i.imgur.com/4zQD1lf.png https://i.imgur.com/wLhIIkr.png https://i.imgur.com/FvIceuO.png

My AOC 27G2G4 still cannot go to 144Hz and allow my RX5700 to downclock VRAM in idle.

mcfart:

Any way to install the newest drivers on my R9 285? Can't believe that AMD dropped support for this GPU - it supports full DX12 and has GCN 1.2 (newer than the R9 280 etc).

[Mod] NimeZ Radeon Software 21.6.2 WHQL include GCN Support (Released)

HD64G:

My AOC 27G2G4 still cannot go to 144Hz and allow my RX5700 to downclock VRAM in idle.

Got a Viewsonic XG2401 @ 144Hz - GPU-Z showing 6 MHz for GPU and 200 MHz for VRAM as I'm typing this. Get CRU if you don't, and check if "V rate" is set to 144Hz and not 146(or something other than 144). Reboot if change is made. May be nothing, but shouldn't hurt.

Something I've noticed lately - seems the driver has an issue with resolutions, because the size of the Metrics Overlay sometimes sets to 50% @ native. EDIT: Looks like it sets to 50% when VSR has been used...

Digilator:

Something I've noticed lately - seems the driver has an issue with resolutions, because the size of the Metrics Overlay sometimes sets to 50% @ native.

This happened to me on many other drivers since Feb I think. With some WSL/UWP included. Maybe I should raport it...

GREGIX:

This happened to me on many other drivers since Feb I think. With some WSL/UWP included. Maybe I should raport it...

Even if you report it may take many months to fix it, i been reporting to AMD since March and issue still there.

mcfart:

Any way to install the newest drivers on my R9 285? Can't believe that AMD dropped support for this GPU - it supports full DX12 and has GCN 1.2 (newer than the R9 280 etc).

How dare them drop a 8 year old gpu, well that really is just a refresh GCN HD 7950. /sarcasm.

OT: The 285 was an early GCN 3.0, released in late 14' before the (closely related) 380/X or Fury.

I think i finally fix the random stuttering/framerate drops Go to Bios, set GPU PCI E from Auto to PCI E Gen 4 (Navi and 6000 series), i saw my GPU usage around 18% to 20% @ 4K while playing Indivisible, now with PCI E Gen 4 selected i see around 82%. Update: PROBLEM FIX HELL YES, btw this was on a ASUS B550-I Gaming Motherboard latest bios with AMD Sam enable with driver 21.6.2. issue was PCI E Gen on auto was causing AMD Sam or 6900 XT issues for some reason in GPU usage, 14 mins not a single drop in frame rate or stuttering, before it was around 5 mins.

NvidiaFreak650:

I think i finally fix the random stuttering/framerate drops Go to Bios, set GPU PCI E from Auto to PCI E Gen 4 (Navi and 6000 series), i saw my GPU usage around 18% to 20% @ 4K while playing Indivisible, now with PCI E Gen 4 selected i see around 82%. Update: PROBLEM FIX HELL YES, btw this was on a ASUS B550-I Gaming Motherboard latest bios with AMD Sam enable with driver 21.6.2. issue was PCI E Gen on auto was causing AMD Sam or 6900 XT issues for some reason in GPU usage, 14 mins not a single drop in frame rate or stuttering, before it was around 5 mins.

lul, problem from the navi 1 release, damn that's funny

ninja750:

make of the monitor?

AOC G2460VQ6 AOC G2460VQ6 24 inch monitor | AOC Monitors

ninja750:

make of the monitor?

Monitor gaming 32" Odyssey G7 LC32G73TQSUXEN | Samsung España

ninja750:

make of the monitor?

MSI Optix MAG272 165hz stuck max memory clock 144hz is fine

NvidiaFreak650:

I think i finally fix the random stuttering/framerate drops Go to Bios, set GPU PCI E from Auto to PCI E Gen 4 (Navi and 6000 series), i saw my GPU usage around 18% to 20% @ 4K while playing Indivisible, now with PCI E Gen 4 selected i see around 82%. Update: PROBLEM FIX HELL YES, btw this was on a ASUS B550-I Gaming Motherboard latest bios with AMD Sam enable with driver 21.6.2. issue was PCI E Gen on auto was causing AMD Sam or 6900 XT issues for some reason in GPU usage, 14 mins not a single drop in frame rate or stuttering, before it was around 5 mins.

I have AMD 1950x with PCIE Gen 3 only, what am I suppose to do? So in normal games, the stuttering doesn't happen. And while the game is running in the UFO Test doesn't stutter. but the UFO tests stutter when I'm not in a game and while in VR. so what does it tell us? and it doesn't happen with old drivers. it's almost the same thing something Nvidia had So I think your issue is different than mine because I don't have stuttering in 2D games, only VR Games. https://www.reddit.com/r/AMDHelp/comments/lam9hh/6900_xt_hard_stuttering_please_help/ This is my issue, someone recorded Also, it is the same with specific times it just goes pink lines with a little space on each for like 10 sec. [youtube=SMDds7PYsCQ] https://community.amd.com/t5/drivers-software/rx-6800-poor-performance-in-vr/td-p/433074/page/3 https://community.amd.com/t5/graphics/6900-xt-performance-issues-on-valve-index/td-p/445064

NvidiaFreak650:

I think i finally fix the random stuttering/framerate drops Go to Bios, set GPU PCI E from Auto to PCI E Gen 4 (Navi and 6000 series), i saw my GPU usage around 18% to 20% @ 4K while playing Indivisible, now with PCI E Gen 4 selected i see around 82%.

seem to be a mainbord problem: why AUTO does not recognize PCI4.0?

ninja750:

seem to be a mainbord problem: why AUTO does not recognize PCI4.0?

I think latest bios updates on amd boards screw that up. You have to set manually where you didnt had to before.

This driver finally fixes Vulkan shader cache persistence across reboots. Legion RT performance is still broken and driver background daemon still causes vsync stutter with some games (Trine 4). I wonder if it will get fixed this year when not even a dozen Radeon Settngs tray icons due to crashes got the driver devs attention for months...

Left 4 Dead 2 Vulkan version (included on the last update on this game), runs like a crapp, stuttering a Lot.