ClockTuner for Ryzen (CTR) Guide by 1USMUS

Pictus

2020-09-30 19:07

amit:

Cool, I am taking back my words then. Guess I am just unlucky. Besides, After completing all steps, it gives me 4175 MHz clock on both CCX. but when i run Prime95 manually ( Smally FFT ) it instantly crashes. I then increased temp limit to 90c and run test again, then it crashed like after 2-3 seconds. So what could be wrong here? Should I use start over again with tool?

I do not know... But if 4175 crashes, maybe it is better to stay bellow 4175. Maybe have to tweak the LLC, Phase Control and Switching Frequency if the motherboard have these features.

#5837181

Ryu5uzaku

2020-09-30 19:20

Mine is only silver XD fak

#5837182

Passus

2020-09-30 19:20

WhiskeyOmega:

My cpu is supported its just doesnt have Additional tweaks.

My bad mate I read 3990 for some reason

#5837183

Netherwind

2020-09-30 19:21

Worth going through all this hassle if I already know I can do an all-core OC of 4450/4425MHz on my own?

#5837184

Undying

2020-09-30 19:24

Netherwind:

Worth going through all this hassle if I already know I can do an all-core OC of 4450/4425MHz on my own?

I prefer going into bios and doing it on my own. This software overclocking is not my thing.

#5837203

Global_Boot

2020-09-30 20:05

Worked like a charm for me on my 3900x. I ran the test default and it gave me 4475 4500 4425 4400 @ 1250v.(it took like 45 minutes) I then ran it reference freq 4375 and reference voltage 1325 and testing right now.

#5837215

mannix

2020-09-30 20:32

Netherwind:

Worth going through all this hassle if I already know I can do an all-core OC of 4450/4425MHz on my own?

Could be; my 3800x at 4400/4400@1.35V can't even boot into Windows. And the temperature is lower than an all-core OC at same voltage 4350/4250.

#5837231

mannix

2020-09-30 21:25

erm:

hello all, is my ryzen 5 3600 not good? the program after starting the diagnostic tells me that it is a bronze sample ... have I been unlucky with the lottery? ***ClockTuner for Ryzen 1.0r by 1usmus*** AMD Ryzen 5 3600 6-Core Processor (870F10) Micro-Star International Co., Ltd B450 TOMAHAWK MAX (MS-7C02) BIOS ver. 3.72 SMU ver. 46.62.00 DRAM speed 3200 MHz 09/30/2020 21:02:44 AVX light mode Cycle time: 30000 ms Reference frequency: 4050MHz Reference voltage: 1225 mV Voltage step: 6 mV Manual overclocking mode enabled Sets overclocking parameters... CCX1 Quality 127 Frequency 4050 MHz Voltage 1225 mV CCX2 Quality 116 Frequency 4050 MHz Voltage 1225 mV Step# 1 Diagnostic VID voltage: 1225 mV Stress test started! 09/30/2020 21:04:59 CPU Vdroop: 1.1 % CPU Temperature: 52.1° Stress test stopped! 09/30/2020 21:05:33 Step# 2 Diagnostic VID voltage: 1219 mV Stress test started! 09/30/2020 21:05:34 CPU Vdroop: 1.1 % CPU Temperature: 53.6° Stress test stopped! 09/30/2020 21:06:08 Step# 3 Diagnostic VID voltage: 1213 mV Stress test started! 09/30/2020 21:06:09 CPU Vdroop: 1 % CPU Temperature: 54.2° SOC SVI2 1.094 Thread# 13 fall down, usage 65.7% Stress test stopped! 09/30/2020 21:06:12 Step# 4 Diagnostic VID voltage: 1219 mV Diagnostic results: Energy efficient: 3.32 AMD Ryzen 5 3600 6-Core Processor - Bronze sample Recomended values for Overclocking: Reference frequency: 4150 MHz Reference voltage: 1275 mV Recomended values for Undervoolt: Reference frequency: 3950 MHz Reference voltage: 1175 mV

This classification is from the Diagnostics which is not really reliable at the moment. If you try again or change some BIOS settings could easily become a Golden or Platinum sample :P

#5837232

mannix

2020-09-30 21:27

galax:

Can anyone help explain how I would use CTR to perform an undervolt? I am not interested in higher performance, but would love to see the same performance with lower power consumption. What settings would I adjust to achieve this?

If Diagnostics can run properly and you can finish the testing successfully is going to suggest you some settings for undervolting too. Recomended values for Overclocking: Reference frequency: 4150 MHz Reference voltage: 1275 mV Recomended values for Undervoolt: Reference frequency: 3950 MHz Reference voltage: 1175 mV

#5837233

Hilbert Hagedoorn

Administrator

2020-09-30 21:31

I just uploaded v1.0 beta 2 with a number of fixes.

#5837243

Hilbert Hagedoorn

Administrator

2020-09-30 22:02

DarkGreenDragonite:

Should we keep posting results/issues on this thread? Just wondering if there's a public issue tracker or something similar.

You should, however, 1usmus is extremely busy at this time, but I am sure he'll read it.

#5837253

Evildead666

2020-09-30 22:13

So I ran this first V1 version lots of times, and got to a Silver chip, every time. Not changed from 3200/C14 yet. (3800X) 4.375MHz at 1.345V all core OC. Currently folding to see if stable. My Asus Mobo had to have LLC (Load Line calibration, CPU) to 'Higher', one under 'Extreme'. And the CPU Phases to 'Extreme' (All Phases in use' rather than the default, which doesn't seem to use all of them). I have an Asus TUF B450M-PRO Gaming mobo, with Watercooled VRM's, CPU and GPU, in that order.

#5837254

WhiskeyOmega

2020-09-30 22:21

Ouch Apparently my 3950x is silver sample. Considering this "Silver" sample 3950x got 169000mbps 7zip & 10356 on CB20 on hwbot Im not sure how you class the 3950x's. https://i.imgur.com/Yu5Mr0s.png

#5837271

Evildead666

2020-09-30 22:53

Kaltern:

***ClockTuner for Ryzen 1.0s by 1usmus*** AMD Ryzen 7 3700X 8-Core Processor (870F10) ASUSTeK COMPUTER INC. TUF GAMING X570-PLUS BIOS ver. 1407 SMU ver. 46.54.00 DRAM speed 3000 MHz 09/30/2020 21:19:43 AVX Light mode Cycle time: 240000 ms Reference frequency: 4075 MHz CCX delta: 25 MHz Reference voltage: 1250 mV Target voltage: 1250 mV Cinebench 20 started Cinebench 20 finished with result: 3203 Voltage: 0 V PPT: 0 W Temperature: 0° Manual overclocking mode enabled Step# 1 Sets overclocking parameters... CCX1 Quality 137 Frequency 4075 MHz Voltage 1250 mV OC+ CCX2 Quality 122 Frequency 4075 MHz Voltage 1250 mV OC+ Stress test #1 started! 09/30/2020 21:22:00 FFT: 2048 CPU Vdroop: -Infinity % CPU Temperature: 0° Stress test stopped! 09/30/2020 21:23:27 Stress test #2 started! 09/30/2020 21:23:28 FFT: 1344 CPU Vdroop: -Infinity % CPU Temperature: 0° Stress test stopped! 09/30/2020 21:24:54 Stress test #3 started! 09/30/2020 21:24:55 FFT: 4096 CPU Vdroop: -Infinity % CPU Temperature: 0° Stress test stopped! 09/30/2020 21:26:21
I suspect this isn't working quite right... Temps next to CCX1 and CC2 register, but C01 C02 etc just show zero. Just me?

Bios Update ? https://www.asus.com/Motherboards/TUF-GAMING-X570-PLUS/HelpDesk_BIOS/

#5837341

MattyAu

2020-10-01 07:29

Updated to Beta 2, Reference Frequency still >6000MHz after running diagnostic. Using a Ryzen 3 3100 on a Asrock B550M Steel Legend mobo. I assume the mobo is the issue. *Followed all steps, BIOS correct, confirmed running Beta 2, reread the guide 3 times over to ensure I didn't miss anything.

#5837375

Athlonite

2020-10-01 09:34

Here's mine after a BSOD on first run with msg Stop Code: Memory Management successful tune https://img.techpowerup.org/201001/ctr-1-0-finished-profile.png CB20 results https://img.techpowerup.org/201001/ctr-1-0-finished-cb20-results.png

#5837382

Garwinski

2020-10-01 09:59

Hootmon:

I upgraded to beta 2, and I cant even run diagnosis anymore. The fields are greyed out. It would at least run in the first beta
***ClockTuner for Ryzen 1.0s by 1usmus*** AMD Ryzen 5 3600X 6-Core Processor (870F10) Gigabyte Technology Co., Ltd. X570 AORUS ELITE BIOS ver. F30a SMU ver. 46.64.00 DRAM speed 3600 MHz 10/01/2020 01:48:14 Critical error. Core tags are not defined correctly! You should read the guide.
The only thing that seems relevant is all the cores have a value of '100' to the right of the clock speeds. Was getting different numbers there in previous beta. Other values are being populated via Ryzen Master seem OK.

I remember there is something specific in the guide when you the Core tags are nog defined correctly. So in this case, if you still have this problem, check the guide out from start to end again (like the error message said), somewhere in there this problem is mentioned.

#5837387

Swordfish

2020-10-01 10:15

HWINFO shows my average CPU core voltage at 1.427v. I stopped using the app because I think that's too much.

#5837403

pegasus1

2020-10-01 10:55

On my 3800x i looked at both the performance and power saving recommendations and the difference in voltage is significant. i went with the power saving which runs the CPU at 4200mhz but drops temps in many (CPU demanding) progs by 10C (on custom water) but i saw only a 1fps drop when i benched FC5 at 4k and max settings.

#5837419

Mufflore

2020-10-01 11:37

Max(IT):

Great. What about already applied profile ? How can update the beta 1 without losing my already applied profile (if possible) ?

I suggest keeping a drive with an OS backup on it for testing. ie backup your OS, restore to another drive, test what happens on that drive.