AMD Catalyst 13.2 BETA download

Graphics cards - AMD Adrenaline (Windows 10/11) 474 Updated by Hilbert Hagedoorn

Click here to post a comment for AMD Catalyst 13.2 BETA download on our message forum
https://forums.guru3d.com/data/avatars/m/73/73230.jpg
GW2 : 1) acting laggy (i see 45+ fps but i feel like i have 18-22 fps) for me as all the drivers starting with 12.9 but those are the worst of them 2) got a white rectangle in the map loading screen (never got such thing so far with other drivers) 3) white flicker in the area where i usualy check 4) slow loaded some textures (posible not an driver issue but i can't be sure) 1) & 2) made me think that those driver are not really ready 3) & 4) can be a driver issue, can also be an issue with gw2 engine (that's not a great one)
most gw2 issues are due to the current state of the gw2 engine, Anet made some very poor choices when developing gw2. 1. dx9 rather then 11(because they wanted to sell the game to people whos systems are running xp still, even tho they cant really run it properly...) 2. they went with umbra for occlusion culling and rely on it WAY to much, if you ever see what the map looks like in areas they dont expect you to get to, you see alot of visable surfaces that are multi layers of rocks/terrain over rocks/terrain, they know this is an issue and are still working on it.... 3. the games dependant on 1 thread for video performance, it has like 46 threads but theres 1 heavy thread that holds everything else back, this is why people with high end intel chips still have perf issues just like AMD users do. 4. the games 32bit without PAE, so its very limited on ram it can use.... word is they are "working on" a dx11 update but thats months out if not more...they are working on perf issues.....still thats months out im sure..... Still, I was in the WoW beta and.....it was worse on launch then gw2 was, and anet are doing a better job getting stuff fixed then blizzard did with WoW on launch.......Give them time, they will get things worked out eventually.....
https://forums.guru3d.com/data/avatars/m/64/64284.jpg
Yes thanks ZealotKi11er and Guru3D for hosting..
data/avatar/default/avatar39.webp
Tried on Far Cry 3 and Hitman Absolution and I can say there is visible improvement towards 12.11 Beta11. Thanks asder00 and thanks AMD ; good job guys
https://forums.guru3d.com/data/avatars/m/73/73230.jpg
GW2's executable is LAA, just checked mine.
they must have added that since the last time i checked, they have been being pushed pretty hard by alot of us to get with the times, i mean, its 2013 and they are still using dx9c.....an API released August 6, 2004, rather then a modern api that could not only improve perf but also gfx quality. From what some of us can figure out from things the anet people have said, this could be because they have been considering a console version of gw2, and since current gen consoles are dx9 level hardware...... also they wanted to capatialize on the market of people who either cant or wont upgrade to windows 7.... also note: properly done dx11 can still benefit people running dx9 and 10 hardware, things like driver level multithreading still works, and dx11 can simply disable or run in software those features that the hardware dosnt support(im in a couple beta's that do this now) oh well, anet will do what anet will do.....just seems silly to me that they didnt go dx11, sure they would have lost some sales to xp users(who for the most part really cant run the game properly anyway) but they would have gained sales and been able to push the fact they where using modern hardware to its fullest......:/ well its lunch time, im gonna eat 😀
https://forums.guru3d.com/data/avatars/m/73/73230.jpg
Made some tests on Stuttering in Crossfire! http://www.****.org/forums/viewtopic.php?p=143655#p143655 Doesn't seem to work at all. If i had enough space i'd make a fresh windows install and try there.... Edit: there in the link instead of **** should be w and s and g and f !
what a stupid site to filter......ws gf is a very helpful place in my exp.....cant count how many times they have had the info i needed to fix a game problem on widescreen monitors......
data/avatar/default/avatar22.webp
usually the filters exist because theirs been some trash talking somewhere in the past.
data/avatar/default/avatar09.webp
I posted this in the 13.1 WHQL thread, but is there any chance of somehow utilising that HDMI audio fix on the 13.2 beta?
data/avatar/default/avatar14.webp
I'm a bit confused ... but is it necessary to install 12.11 CAP2 after installing 13.2 Beta? Sry for the stupid question ...
No the 13.2 Beta includes CAPs that are newer than the 12.11 CAP2. Newer = they include the older CAPs (one of which is 12.11 CAP2).
https://forums.guru3d.com/data/avatars/m/93/93080.jpg
No the 13.2 Beta includes CAPs that are newer than the 12.11 CAP2. Newer = they include the older CAPs (one of which is 12.11 CAP2).
Strange, I see no new caps installed at all...
data/avatar/default/avatar30.webp
Strange, I see no new caps installed at all...
stand alone cap installs go to a different area than bundled ones. Heres the differencies between the cap in this driver and the 12.11 cap2, so you can test these games and check for improvement: 3dMark Vantage (cfx) Battle Forge (cfx) Aliens Vs Predator (cfx) Lost Planet 2 (cfx) F1 2012 (cfx) 3DMark 11 (cfx) Crysis 2 (cfx) Battlefield 3 (cfx) Dirt Showdown (cfx) Crysis 3 (unreleased) Medal of Honor: Warfighter (cfx) Tomb Raider (unreleased) Nexuiz (cfx) Blacklight: Retribution (cfx) FarCry 3 (single card) Skyrim (cfx & single card) GuildWars 2 (cfx & single card) Borderlands 2 (cfx & single card) Rise of the Triad (unreleased)
data/avatar/default/avatar35.webp
So, Worth it for a 5870M or stay with 13.1 / other recommendations?
data/avatar/default/avatar16.webp
I tried on my 5850m, worked great until I shut my lid... bsod every time. I dont have it set to go to sleep when closing the lid either, but this looks promising as games felt smoother. Frame latencies seem to be improved in guild wars 2 and dishonored, but framerates are the same.
finally AMD did it, this is a great driver on Mobility 5650.[/Quote] Hmm, these two seem to conflict with each other. Seems odd you get a GSOD when closing your laptop....
https://forums.guru3d.com/data/avatars/m/93/93080.jpg
stand alone cap installs go to a different area than bundled ones. Heres the differencies between the cap in this driver and the 12.11 cap2, so you can test these games and check for improvement: 3dMark Vantage (cfx) Battle Forge (cfx) Aliens Vs Predator (cfx) Lost Planet 2 (cfx) F1 2012 (cfx) 3DMark 11 (cfx) Crysis 2 (cfx) Battlefield 3 (cfx) Dirt Showdown (cfx) Crysis 3 (unreleased) Medal of Honor: Warfighter (cfx) Tomb Raider (unreleased) Nexuiz (cfx) Blacklight: Retribution (cfx) FarCry 3 (single card) Skyrim (cfx & single card) GuildWars 2 (cfx & single card) Borderlands 2 (cfx & single card) Rise of the Triad (unreleased)
Right I know its installed with the driver, but the old style showed the applications in a list and you could select them. I guess that method has been removed and it's all automatic, and you can't manually select and force it from the drop down menu anymore. Other than all of that, this driver is amazing for sure. It has everything 13.1 had and a bit more. Sure I understand it doesn't have everything that the official 13.2 will, but its a better driver than 13.1 from my experiences.
blah blah blah, more forum nonsense. dx9 still makes the most sense even today, dx10 was a bust and the 8800/9800 series are still the mostly widely used cards. The game is extremely well done for what it is, leave it alone. They started developing this game in 2007, so figure it out...
Yes they started developing it in 07', but that does not mean changes can't still be made. They mentioned that they would support DX11 after it started development, and decided to drop it. It could have been a choice to enable or not. From what I understand, they still have plans to make it DX11 in the future, just how GW1 rendered in DX9 or 8.1 if you didn't have a DX9 card when factions released.
data/avatar/default/avatar26.webp
Just got back from work. Downloading and looking forward to try 'em. Thank you asder (you, the leaker (!) as well).
data/avatar/default/avatar20.webp
ňThey started developing this game in 2007, so figure it out...
And they were recycling it over and over again for the past 5 years. So go figure it out...
https://forums.guru3d.com/data/avatars/m/113/113550.jpg
Im 100% sure, these drivers were the only thing i installed in the past 2 months. It happened to me and some others friends too. I dont know what's going on, but its not the only issue i have. Im also unable to change my ethernet options or turn on the options to save energy...weird. I did a clean install, used the link from guru3d. I'm not complaining, i like these drivers so far, but this shouldn't be happening...
Did you use amd uninstall utility ?
data/avatar/default/avatar40.webp
Just played far cry 3 with beta 13.2, no real improvement with cfx 7970s vs 12.11 beta 11, still stuttering. Guess we'll have to wait until the memmory manager rewrite. Overall glad to see new drivers though (other cfx tweaks), and i do like the per application tweaks to the control panel , even if i wont use them due to radeon pro.
Some other Crossfire Useres here who don't see any difference ?
data/avatar/default/avatar21.webp
Is the "NO VIDEO with Media Player Classic Home Cinema when using full or half floating point processing" BUG present in this one too?
64 or 32 bits?
:stewpid: MPC-HC ought to run with LAV Filters: best improvement ever over own integrated FFDshow and related. You could find plenty of how-to about LAV on MPC-HC through the web :infinity: else Mad Vr for x86 build (warning: heavily GPU dependent)