So, all my short cables get 50cm shorter? Yay! Not only looks ugly it's stupid.

I'm always torn about products like this--for all intents and purposes, there are many personal computer standards that are largely antiquated compared to modern trends, but at the same time, there's a reason why they were standards in the first place. Probably my biggest irk is when case manufacturers put in hard drive mounts as an after thought, when they really should be placed right smack dab in front of a fan. Although it's less of an issue now since hard drives are used as low-performance archives, but when Western Digital Blacks were king, it sorely limited what cases you could use since those things ran HOT.

I hope you get a chance to review this case HH. I am interested in how well it functions.

What's with the box above the io? And the box at the bottom? Instead of all the wasted space, it's about time someone made a SFF case that takes an ATX motherboard.

I think this should have at least one bottom fan, Motherboard ventilation is important none the less, but yes with the GPU receiving intense ventilation and the CPU cooler used in the horizontal plane it could be a great contender. Would like to see it reviewed.

i get the point of that i/o port on the top? i mean other to just hide the cable? I mean there all hidden in first place cause the in the back of the case. I get what they trying to do but. no thanks, that make more complicated to unplug thing they need be too

@slyphnier preference thing i guess, personal i wouldnt like it cause I reguarly unplug the cables from pc move pc to table to remove dust from inside, which such case would now have unplug those cable and get them out of single hole there all routed threw before being able to do that. forget that it would make my cable that much shorter. Front stand point of all the heat is going up well in theory it all going up with less restriction should help temps, i also dint like idea of bend cable they way they need to be bent to get in there but that is just me

i can see it being useful if you HAD to have this exact case, but personally there are so many options available i would just choose another case.

nooooooo 🙁 the whole point of the vertical placement is to have a vertical airflow with bottom fans blowing air towards the gpu,nvme and chipset and fans exhausting at the top/front/rear here it's just the usual "fake no airflow" front-rear except with the gpu making a big wall in the middle >< buy a case accepting a vertical gpu mount rather than this

I think the only potential problem is getting debris dropping into the motherboard and gpu ports as a potential problem down the road. Need to protect them ports so keeping those port plugs is very important. Its good to see direct air flow from outside case directed towards the graphics card. It isnt important where the exhaust is located really as heat rising argument does very little to performance in the real world.