To get early GOLF FAN G3 and a better performance to cool your PC case quietly!
GOLF FAN G3: The features of G3 is silent and speedy. All GOLF FANs from G1 to G3 is consistent to be quiet and powerful.

Specifications of the GOLF FAN G3 series:

• ZG3-080D: 80x80x25mm, 2000rpm, 32.41CFM, 15.6dBA.

Though not announced a new cooler from Arctic is available, the Accelero L2 Plus.

The L2 Plus is designed to be a GPU fan-heatsink with a number of individual heatsinks included in the package to cool the VRM and memory. It is targeted at mid-thru-performance segment graphics cards with square GPU bolt layouts. The main fan-heatsink measures 119 (L) x 94 (W) x 51 (H) mm, weighing 250 g. It is a monolithic aluminum heatsink, that uses a 92 mm fan to ventilate it. The base doesn't cover the entire bottom area of the heatsink, and so the fins guide the air down to the PCB, to cool other components.

The main heatsink has the capacity to handle thermal loads of up to 120W. The 92 mm fan spins at speeds between 900 and 2,000 RPM, and is PWM-controlled. It can push up to 27 CFM of air, with noise-level of 0.4 Sone. Apart from the required screws and bolts, there are eight heatsinks each for memory and VRM chips (standard sized MOSFETs). The small heatsinks don't come with thermal tapes, but instead a sachet of Arctic G1 Adhesive TIM is bundled, apart from non-adhesive MX-4 for the main heatsink. GPU compatibility is listed below. The Arctic Accelero L2 Plus is priced at $22.67 in the US, and

Cooler Master is releasing a new Hyper 612S CPU Cooler. Actually two region bound models, the Hyper 612S (EU) And 612 PWM (US) CPU Cooling Solutions.

With the use of the silent mode adapter the 612 series can run at incredibly low noise without sacrificing too much cooling performance thanks to its 6 long Heat pipes and massive fin surface area. Or you can add an additional 120mm fan to boost the air throughput and improve its cooling performance even further.

Innovative design and materials
The Hyper 612 series CPU coolers are designed for optimum heat dissipation at low fan speeds thanks to wider fin gaps, a special fin blade design, and a precise Heat pipe layout that has all 6 Heat pipes crossing the CPU

ENERMAX is proud to announce the release of all new CPU Cooler line, ETS-T40 series. It has world leading thermal resistance value down to an incredible 0.09

They won't get any cheaper then this, not bad for the money. GELID Solutions adds a 66mm high multi compatible CPU Cooler with PWM fan to its popular SILENT product portfolio.

The Siberian with its competitive pricing contains a premium aluminum heat sink and a silent 80mm fan with GELID intelligent PWM control. The cooler offers multi compatibility for AMD & Intel latest sockets. It features a compact size and is especially suitable for HTPC and small chassis. The silent fan achieves high airflow rate and the GELID intelligent PWM Control accelerates the fan speed only when it

Corsair officially introduced its H80 and H100 watercooling solutions.

Corsair

Shjeesh ... that's just a design of an Asian guy overcompensating for something -- just silly -- but still cool :)

Expreview received some photos of Prolimatech's upcoming Camouflage series coolers. It includes a Megahalems and Genesis model, but except the color both parts are identical to the models already available on the market. These as such match the Sabertooth mainmboard series color wise.

Currently there are diversified CPU Coolers in the market,but the color matched schemes seem to be not so eye-catching,which always come with silver,black and copper salmon pink.However,ProlimaTech decides to make its products more personalized with the debut of its brand-new Camouflage series coolers.

This time ProlimaTech rolls out two models,they are based on the designed of Megahalems and Genesis,the color scheme is just like that of ASUS SABERTOOTH series motherboards.

The two new coolers both belong to Camouflage series,and they are called Megahalems Camouflage and Genesis Camouflage.Apart from the color,the other specs are supposed to be the same as the common one.

Check the thumbnails for a good laugh ..

GELID Solutions unveils the upgraded version of the multi-award winning Tranquillo CPU cooler which is a product of GELID Solutions SILENT product line. GELID Solutions brings the Tranquillo to the next level. As with the previous edition the Rev. 2 Tranquillo uses 4 power heat pipes and a unique heat pipe constellation to achieve the best in class heat transfer from the CPU core to the aluminum fins.

The heat pipe constellation was further optimized to prevent any conflict from any components on the latest mainboards. The new AMD clip enables to install the cooler in four directions (4x90

Arctic introduced two new CPU coolers specifically designed for gaming/enthusiast PCs that stay on 24x7, or for "continuous operation".

Two models are released, the bigger Freezer 13 Pro CO and smaller Freezer 13 CO, designed for thermal loads of up to 300W and 200W, respectively. The 24x7-readiness comes from the fans, that use dual ball-bearing and are designed to be less sensitive to dust. Arctic claims that the fans used are 5 times more durable than generic fans. Both are aluminum fin tower-type heatsinks that consist of U-shaped copper heat pipes that pass through a copper base, conveying heat to the arms that pass through the aluminum fin stack.

Measuring 134L x 96W x 159H mm, and weighing 893 g, the Freezer 13 Pro CO uses a 120 mm fan that spins at 300 - 1350 RPM, pushing 49.7 CFM of air through the heatsink. It also uses a 50 mm blower that sits on top of the CPU base, which resembles the blowers found in single-slot VGA coolers, it spins at speeds of 700 - 2700 RPM, blowing air in all directions, cooling the components around the CPU socket such as VRM, memory, and northbridge. It uses four copper heat pipes that pass through the heat fins in a uniform file. The Freezer 13 Pro CO is priced at US $58.32.

At 706 g, measuring 123 L x 96 W x 130 H mm, the smaller Freezer 13 CO uses a 92 mm fan that spins at 600 - 2000 RPM, pushing 36.4 CFM of air through the fin stack. The stack itself is a lot more compact than the one on the Pro variant, heat is fed to it by four copper heat pipes. This cooler goes for $43.71. Both coolers have a film of Arctic MX-4 thermal compound pre-applied, both are backed by 6 years warranty. That should tell you something about the durability of the fans, to put up with 6 years of grueling 24x7 operation [via tpu]

Scythe released the Mugen 3, it will be available in retail stores for 35.90 EUR, that's excl. VAT:

Japanese cooling expert Scythe is announcing today the successor of popular Mugen 2 CPU Cooler. Mugen 2 CPU Cooler was awarded many times and is well known world-wide to mainstream users, Overclocker and Enthusiasts. During the development process main focus was set on improvement of performance and mounting mechanism as well as shrinking the heatsink dimensions. New Mugen 3 CPU Cooler is ready to take on the legacy.

While optimizing the performance the whole heatsink design of Mugen 3 CPU Cooler was re-worked which resulted in creation the improved fin-structure M.A.P.S. (Multiple Airflow Pass-Through Structure). Enhancements were achieved by reducing the aerodynamic resistance as well as improving of the overall heatsink stability. Furthermore Mugen 3 is equipped with total of six high-quality copper-heatpipes where the predecessor had only five. Typical for Scythe is the excellently processed and flat surface of the copper base which was refined by a thin nickel layer to prevent corrosion.

Mugen 3 is equipped with a popular 120 mm axial fan from the Slip Stream PWM Silent series. Using the PWM function of the axial fan mainboards are able to control the fan speed between 300 and 1.600 RPM, which allows a constant airflow between 14,7 and 88,11 CFM respectively 24.98 and 149.67 m

Arctic Cooling announced the Accelero Twin Turbo II, a new graphics card cooler with copper base, 35 aluminium fins, five heatpipes and two 92mm PWM fans with an airflow of 54CFM. The cooler is rated at 160W, which means top-of-the-line graphics cards aren't supported. It measures 217mm x 122mm x 53mm (L x W x H) and weighs 479g.
ARCTIC is proud to unveil the Accelero TWIN TURBO II, a multi-compatible VGA cooler featuring uncompromised cooling performance with wider compatibilities. Designed for mid-range to high-end VGA boards, the Accelero TWIN TURBO II optimizes the overclockability for enthusiasts, gamers and high-demand users.

Equipped with two 92mm PWM fans spinning up to 2,000 RPM, the Accelero TWIN TURBO II delivers generous airflow to cool down the GPU and surrounding components whenever possible. Heat from the GPU is transferred via 5 heatpipes and dissipated efficiently with the 35-fin aluminum heatsink. In order to extend the service life of the GPU, the ARCTIC MX-4 thermal compound is pre-applied at the copper base to increase thermal conductivity.

Taking multi-compatibility at heart, the Accelero TWIN TURBO II is equipped with a versatile and intuitive mounting mechanism to accommodate a broad range of models at present and in the future. A comprehensive cooling set comprised of RAM/VR heatsinks in assorted sizes is provided to accommodate different VGA boards. Speaking of RAM/VR cooling, the Accelero TWIN TURBO II provides the user with G-1, an electrically non-conductive thermal glue for affixing RAM/VR heatsinks. Unlike thermal tapes, G-1 delivers excellent thermal conductivity and long-lasting adhesiveness, while removal of it is extremely easy without leaving residues behind. Thanks to the low noise impeller and patented fan holder, the Accelero TWIN TURBO II is virtually silent under all circumstances. As the PWM controlled fans run according to the load generated by the GPU, noise level is always kept at the minimum.

Definitely another Best-Buy for cooling high-end graphic cards, the Accelero TWIN TURBO II comes with a 6-year limited warranty, with MSRP at $ 63.32 USD and

If you are the owner of an EK nickel plated waterblock, then please check your setup. TPU reports the following via rrtech:

Water-cooling major EK Waterblocks (EKWB) halted the production of nickel-plated copper water blocks. The company received several complaints from users about the nickel plating to be of substandard quality, and corroding away much faster. Nickel plating itself is supposed to work as a corrosion-resistant coating over copper. Nickel plating gives the surface of the block a chrome-like lustrous shine. EKWB, after conducting its own tests, blamed silver coils and copper sulphate additives, anti-algae agents used in public water supply. A weak defense, considering people use distilled water (battery water) in their loops, or coolants that are formulated to be less corrosive than tap water on metallic parts of the loop.

A RRTech forum member conducted a wide range of tests including microscopic imaging of a water block, revealing what he alleges to be substandard quality of nickel plating, rather than corrosion caused by bad coolant. Meanwhile, EKWB halted production and sales of nickel-plated copper water blocks.

In its latest statement, EKWB says: "As EK is looking for lasting solution for nickel plating issue (concerning corrosion because of silver coils and copper sulphate additive) we decided to halt sales of nickel plated products till solution is found and tested. Our resellers were advised to halt sales too. We cannot put users into position, that we replace products and corrosion starts again on new product. Hopefully we will find an answer and tested solution in short while. We will update you as soon as we have any news. However, If customer insists on buying EK nickel block, we offer a customer full 24 month warranty on material, manufacturing and corrosion."

Yikes a small leak from an etailer exposes some of the stuff Corsair is to launch soon as TC-Mag noticed Corsair will soon introduce two new watercooling kits; the H80 with a 120mm radiation and the H100 with a 240mm rad.

"Both models use two fans. Both upcoming CPU coolers have their fans operate at up to 2600 RPM, they boast a sound output of 22 to 39 dBA, and support Intel LGA 775/1155/1156/1366 and AMD AM2/AM2+/AM3 processors.

According to the now removed store pages, the H80 costs

Deepcoolunveils a new CPU cooler today, called Assassin. Performance-and-Silence is the core of this twin-tower designed air cooler. Featuring eight 6mm copper heatpipes and a shining nickel plated heatsink, the Assassin could dissipate heat very effectively.

The Assassin will come with two fans, both of which are patented with rubber cover frame.

One fan is 120mm functioning as the pushing force, and the other is 140mm that could be mounted between the two towers to draw hot air through the heatsink. In addition, a third fan can be attached if the motherboard design allows it. And the Assassin is fully equipped to support Intel LGA775/1155/1156/1366 and AMD AM2/AM2+/AM3. The launch date and price is unknown for the moment.

Corsair announced the extension of the warranty for the Hydro Series H60 High-Perfformance Liquid CPU Cooler from two years to five years. The warranty is offered to customers who have already purchased an H60, as well as to new customers.

Corsair now warrants that a genuine Hydro Series H60 purchased from an authorized Corsair reseller will be free from defects in workmanship for five years from the date of purchase. Except where prohibited by applicable local law, the warranty is limited to the original purchaser and is non-transferable.

The Hydro Series H60 is a closed-loop CPU cooling system that uses low-permeability FEP (Fluorinated Ethylene Propylene) tubing for near-zero evaporation. The liquid is cooled by a custom-designed high static pressure fan, and the newly designed micro-channel cold plate employs a split-flow manifold for optimal cooling efficiency.

The new, longer warranty reflects the care that Corsair has taken with design and construction of the H60, as well as the choice of high-quality materials,? said Ruben Mookerjee, VP and General Manager for Components at Corsair. “Our customers can enjoy the benefits of high performance CPU cooling and confidently expect reliable operation for at least half a decade.

Alpenf

Hmm, no thanks ? Scythe makes the headlines again, this time with the Susanoo a massive CPU cooler that weighs 1,565g and measures 210mm x 210mm x 160mm. The cooler has a nickel-plated copper base and features twelve 6mm heatpipes that dissipate the heat to a wide aluminium fin array. Airflow is provided by four 100mm Slip Stream fans, which provide 50.05 to 200.21CFM of airflow at a noise level of 9.42dBA to 37.69dBA.

Susanoo is compatible with Intel LGA775/1155/1156/1366 and AMD Socket AM2/AM2+/AM3 processors. It will be available in retail stores for 89.90EUR (incl. 19% VAT).
The Susanoo Scythe CPU cooler consists from the total of twelve 6mm heat pipes and features a two segment heat sink configuration by the name of DBS (Double Block Structure), resulting the Susanoo to this massive top-flow cooler form. Thanks to the large cooling area, the surrounding components such as MOSFETs, Northbridge, RAM and graphics card can be cooled simultaneously.The Scythe with Susanoo CPU Cooler is equipped with FMSB3 (Flip Mount Super Back-Plate 3) to ensure secure mounting on to the motherboard.

D.B.S (Double Block Structure)
By splitting the heatsink fin and heatpipe structure into 2 layers, 6 heatpipes at the bottom part + main heatsink fins to absorb the heat as a primarily stage, then the upper 6 heatpipes and sub heatsink fins to absorb the rest of the heat to create the ultimate cooling solution. Total 12 heatpipes are used in this super ultra-sized dimension heatsink, challenging the limit of the top-flow heatsink performance in the market!

W.A.M.S (Wide Area Multi Fan System)
All components around the CPU socket, including MOSFET, Northbridge, VGA, as well as RAM, this super ultra-sized heatsink can cool the entire devices in your PC! By using the build-in fan controller, this cooler can meet the demand from silent to high-performance users!

F.M.S.B.3 (Flip Mount Super Back-Plate 3)
Improved Scythe original back-plate names F.M.S.B.3 (Flip Mount Super Back-plate 3), the compatibility has been maximized as well as achieving the solid mounting of the cooler onto the motherboard.

Click on the thumbnails ..

Zalman are pleased to announce another member of V-Shape design family, Zalman CNPS7X LED. The efficient V-shaped dual Heatsinks with Zalman

Check out the Alpenf

OK -- too fun to not post. FAIL ?

Evercool rolls out Dr. Cool, the first cooling product for routers. The device clips to your router and offers cooling via a 80mm fan. Pricing and availability is unknown.
Guess what is it?

A crab? The tool for clip game? Or a small UFO?

No, all the above answers are wrong.

It is the new cooler launched by EVERCOOL, who is always driven by the coexistence of both cooling and aesthetics, but also emphasizing the usability.

What are the purposes of Dr. Cool?

Dr. Cool is the World