Power consumption

We'll now show you some tests we have done on overall power consumption of the PC. Looking at it from a performance versus wattage point of view the power consumption is not as bad as I expected it to be. The card according to NVIDIA has a TDP of ~125-130 Watts.

Our test system contains a Core 2 Duo X6800 Extreme Processor, the nForce 680i mainboard, a passive water-cooling solution on the CPU, a second loop with active water-cooling for the graphics card (Asetek), a DVD-rom and WD Raptor drive.

	Videocard 100% load System Idle GeForce GTS 512 MB 297 168 BFG GTS 512MB WC 303 169

Our test methodology is simple: we have a device monitoring continous and peak wattage during our test and benchmark runs, we look at the peak wattage to verify maximum power consumption. You are not looking at the power consumption of the graphics card, but the consumption of the entire PC.

So here's my power supply recommendation:

• A single GeForce 8800 GTS 512MB requires you to have a 500 Watt power supply unit at minimum if you use it in a high-end system. That power supply needs to have (in total) at least 28 Amps available on the 12 volts rails.
• A second GeForce 8800 GTS installed on this system requires you to have a 600 Watt power supply unit at minimum if you use it in a high-end system. That power supply needs to have (in total) at least 40 Amps available on the 12 volts rails.

There are many good PSU's out there, please do have a look at our many PSU reviews as we have loads of recommended PSU's for you to check out in there. What would happen if your PSU can't cope with the load?:

• bad 3D performance
• crashing games
• spontaneous reset or imminent shutdown of the  PC
• freezes during gameplay
• PSU overload can cause it to break down

Never underestimate the importance of a good power supply.

BFG GeForce 8800 GTS OC2 WC core temperature

Let's have a look at the temperatures these single slot design coolers produce. As always we measured at a room temperature of 21-22 Degrees C.

I'd like to say bloody fooking hell... [Ed - now now, thats a warning there hilby] but I should probably not write that so let's just write, hey quite interesting ! Your card will idle at 33 degrees C and we topped out at a maximum of 41 degrees C.

Now that's just bloody brilliant but ... this is totally dependant on your water-cooling setup. We used a high-performance Asetek kit on the GPU. My rule however is, if you decide to go with water-cooling, spend the extra money and get yourself some proper gear. The benefits are amazing.

Noise Levels coming from the graphics card

When graphics cards produce a lot of heat, usually that heat needs to be transported away from the hot core as fast as possible. Often you'll see massive active fan solutions that can indeed get rid of the heat, yet all the fans these days make the PC a noisy son of a gun. I'm doing a little try out today with noise monitoring, so basically the test we do is extremely subjective. We bought a certified dBA meter and will start measuring how many dBA originate from the PC. Why is this subjective you ask? Well, there is always noise in the background, from the streets, from the HD, PSU fan etc etc, so this is by a mile or two not a precise measurement. You could only achieve objective measurement in a sound test chamber.

The human hearing system has different sensitivities at different frequencies. This means that the perception of noise is not at all equal at every frequency. Noise with significant measured levels (in dB) at high or low frequencies will not be as annoying as it would be when its energy is concentrated in the middle frequencies. In other words, the measured noise levels in dB will not reflect the actual human perception of the loudness of the noise. That's why we measure the dBa level. A specific circuit is added to the sound level meter to correct its reading in regard to this concept. This reading is the noise level in dBA. The letter A is added to indicate the correction that was made in the measurement. Frequencies below 1kHz and above 6kHz are attenuated, where as frequencies between 1kHz and 6kHz are amplified by the A weighting.

	TYPICAL SOUND LEVELS Jet takeoff (200 feet) 120 dBA   Construction Site 110 dBA Intolerable Shout (5 feet) 100 dBA   Heavy truck (50 feet) 90 dBA Very noisy Urban street 80 dBA   Automobile interior 70 dBA Noisy Normal conversation (3 feet) 60 dBA   Office, classroom 50 dBA Moderate Living room 40 dBA   Bedroom at night 30 dBA Quiet Broadcast studio 20 dBA   Rustling leaves 10 dBA Barely audible

0 DBa folks ...  we only have water-flow. But again ... we do have two pabst fans over our water-cooling radiator blowing at it softly. So again, something that is totally dependant on your water-cooling setup. A good quality kit doesn't make much sound though.